High Quality Replacement Battery for Kodak EasyShare Z1012 IS, KLIC-8000 Battery

KLIC-8000 Battery,Compatible with Kodak EasyShare Z1012 IS

+Our batteries are 100% WITH CE-/FCC-/RoHS-Certified for safety
+We only uses high quality materials and grade A battery cells to ensure true capacity and more recharge cycles.
+Thorough, comprehensive testing – each battery cell is tested for correct capacity and to ensure all safety requirements are met - all before installation.

This Kodak KLIC-8000 battery Replaces:

KLIC-8000

This KLIC-8000 battery Fits The Following Kodak Models:

Kodak Easyshare Z1012 IS
Kodak EasyShare Z1015 IS
Kodak Easyshare Z1085 IS
Kodak EasyShare Z1485 IS
Kodak EasyShare Z612
Kodak EasyShare Z712 IS
Kodak EasyShare Z812 IS Zoom
Kodak Easyshare Z8612 IS
Kodak EasyShare Z885

FAQs

Q: How to charge the Kodak KLIC-8000 battery properly?

A: You should charge the replacement battery for Kodak KLIC-8000 before the battery exhaustively discharged, otherwise it will shorten its life. It is feasible to charge the laptop battery before the power is less than 20%. Meanwhile, the battery should be charged in a dry place, and please pay attention to high temperature, which is the biggest threat to battery life.

Q: How to deal with the replacement battery for Kodak KLIC-8000 when you won't use for a long time?

A: If you let your Kodak KLIC-8000 battery lay idle for a long time, please charge the laptop battery or discharge to about 40%, and then put it in a dry and cool place to save. Indoor temperature is best maintained at 15 to 25 degrees Celsius because the temperature is easy to accelerate the battery aging either too high or too low. You'd better fully charge and discharge the battery at least once a month. Finally please save it in accordance with the above method.

Q: How to replace your Kodak KLIC-8000 Battery?

1.Turn off your Kodak KLIC-8000 laptop and disconnect the AC adapter.
2.Release the latch or other attachment devices that hold your battery in place.
3.Slide the old battery out of its compartment or storage bay
4.Take the replacement battery for Kodak KLIC-8000 laptop out of the box.
5.Slide it into the notch or bay.
6.Close the safety latch to lock it into place.
7.Reconnect the AC adapter and give the new battery for your Kodak KLIC-8000 notebook a full charge.

Tags:Kodak KLIC-8000,Kodak KLIC-8000 battery,Kodak KLIC-8000 Camera Battery,Kodak KLIC-8000 Batteries,replacement battery for Kodak KLIC-8000,Kodak EasyShare Z1012 IS.