Dell OptiPlex XPS8950 3910 R13 R14 Replacement AC Adapter - 300W Adapter

H300EPS-01 Charger,Compatible with Dell OptiPlex XPS8950 3910 R13 R14

With latest technology, this adapter is specially designed with built-in protection to protect your computer against unexpected power surge damages. Besides, it also features stable voltage and noise reduction.Overall, this power adapter is of high efficiency and reliability
⚡️ New laptop charger
Most laptops can be used without any issues for approximately 5 to 8 years. However, the average life cycle of their chargers is between 1 and 3 years, depending on the intensity of operation. Among the most frequent reasons for charger replacement are cable loss and disruption.

This Dell H300EPS-01 adapter Replaces:

H300EPS-01 D300E019P 3XY3J

This H300EPS-01 adapter Fits The Following Dell Models:

Dell OptiPlex XPS8950 3910 R13 R14
DC OUTPUT:
+12VA1==/18A
+12VA2==/18A
+12VB==/18A
Output interface: 8+4+4Pin
NOTE :Different power supplies have different sizes, specifications and interfaces. Please purchase according to the power supply parameters and interfaces. Our company ships according to customer orders and general power supplies. If you have any questions, you can first provide a computer model for consultation.

Maintenance and instructions for the Dell H300EPS-01 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

Tags:Dell H300EPS-01 Adapter,Dell H300EPS-01 Charger,Dell H300EPS-01 Power Supply,replacement adapter for Dell H300EPS-01,Dell OptiPlex XPS8950 3910 R13 R14.