Dell Optiplex 9010 2330 9020 AIO All in One CJ4XJ 0CJ4XJ Replacement AC Adapter - 200W Adapter

F200EA-00 Charger,Compatible with Dell Optiplex 9010 2330 9020 AIO All in One CJ4XJ 0CJ4XJ

With latest technology, this adapter is specially designed with built-in protection to protect your computer against unexpected power surge damages. Besides, it also features stable voltage and noise reduction.Overall, this power adapter is of high efficiency and reliability
⚡️ New laptop charger
Most laptops can be used without any issues for approximately 5 to 8 years. However, the average life cycle of their chargers is between 1 and 3 years, depending on the intensity of operation. Among the most frequent reasons for charger replacement are cable loss and disruption.

This Dell F200EA-00 adapter Replaces:

RYK84 CJ4XJ 0CJ4XJ L200EA-00 PS-2201-09DA VVN0X CRHDP CN-0CRHDP

This F200EA-00 adapter Fits The Following Dell Models:

Dell Optiplex 2330; 9010 AIO, 9020; 9030, Inspiron One 2330, 2320.
Dell Optiplex and Inspiron Systems: OptiPlex 2320, OptiPlex 9010, OptiPlex 9020, OptiPlex 9030, Inspiron One 2330.
Note:This PSU only works for Dell Ultra Small Form Factor (USFF) systems.
Please check model number for compatibility before purchasing Connectors: 1x 8-Pin Power Connector; 1x 4 Pin Power Connector

Maintenance and instructions for the Dell F200EA-00 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

Tags:Dell F200EA-00 Adapter,Dell F200EA-00 Charger,Dell F200EA-00 Power Supply,replacement adapter for Dell F200EA-00,Dell Optiplex 9010 2330 9020 AIO All in One CJ4XJ 0CJ4XJ.