Kenwood KNB-14 KNB-15A KNB-17A KNB-20N Replacement AC Adapter - Adapter

KSC-24 Charger,Compatible with Kenwood KNB-14 KNB-15A KNB-17A KNB-20N

With latest technology, this adapter is specially designed with built-in protection to protect your computer against unexpected power surge damages. Besides, it also features stable voltage and noise reduction.Overall, this power adapter is of high efficiency and reliability
⚡️ New laptop charger
Most laptops can be used without any issues for approximately 5 to 8 years. However, the average life cycle of their chargers is between 1 and 3 years, depending on the intensity of operation. Among the most frequent reasons for charger replacement are cable loss and disruption.

This Kenwood KSC-24 adapter Replaces:

TK-190 TK-260 TK-270 TK-272 TK-280 TK-290 TK-360 TK-370 TK-372 TK-380 TK-390 TK-480 TK-481 TH-K2E TH-K4E TK-3100 TK-5400 KNB-14 KNB-15A KNB-17A KNB-20N KNB-22 KSC-24

This KSC-24 adapter Fits The Following Kenwood Models:

Kenwood PB-43 PB-43N TH-K2AT TH-K2E TH-K2ET TH-K4AT TH-K4E
Note: Before you order it,please double-check if the item can work for your radio,please check the compatible list.
Have Standerd US and EU Plug,UK or Need used Conversion Plug
This charger can charge lithium batteries and Ni-MH batteries, but it is normal for the charger to keep flashing red while charging.
Package Include: 1x Charger Base 1x Adapter (US / EU /UK Plug)

Maintenance and instructions for the Kenwood KSC-24 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

Tags:Kenwood KSC-24 Adapter,Kenwood KSC-24 Charger,Kenwood KSC-24 Radio Equipment Battery Chargers,replacement adapter for Kenwood KSC-24,Kenwood KNB-14 KNB-15A KNB-17A KNB-20N.