Dell Optiplex 3050 5050 7050 Replacement AC Adapter - 240W Adapter

D240EPS-00 Charger,Compatible with Dell Optiplex 3050 5050 7050

With latest technology, this adapter is specially designed with built-in protection to protect your computer against unexpected power surge damages. Besides, it also features stable voltage and noise reduction.Overall, this power adapter is of high efficiency and reliability
⚡️ New laptop charger
Most laptops can be used without any issues for approximately 5 to 8 years. However, the average life cycle of their chargers is between 1 and 3 years, depending on the intensity of operation. Among the most frequent reasons for charger replacement are cable loss and disruption.

This Dell D240EPS-00 adapter Replaces:

D240EPS-00 DPS-240AB-11 A 5WNDJ

This D240EPS-00 adapter Fits The Following Dell Models:

OUTPUT MAX POWER : 240W
+12VA==/16.5A
+12VB==/16.0A
STANDBY MODE :
+12VA==/0.5A]
}MAX 2.5A
+12VB==/2.5A]

Dell Optiplex 3050 5050 7050
Dell VOSTRO V3667 V3668 3669......

Connector:
6P+4P

Maintenance and instructions for the Dell D240EPS-00 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

Tags:Dell D240EPS-00 Adapter,Dell D240EPS-00 Charger,Dell D240EPS-00 Power Supply,replacement adapter for Dell D240EPS-00,Dell Optiplex 3050 5050 7050.