HP 8200 6200 6000 8000 8080 Replacement AC Adapter - 320W Adapter

613764-001 Charger,Compatible with HP 8200 6200 6000 8000 8080

With latest technology, this adapter is specially designed with built-in protection to protect your computer against unexpected power surge damages. Besides, it also features stable voltage and noise reduction.Overall, this power adapter is of high efficiency and reliability
⚡️ New laptop charger
Most laptops can be used without any issues for approximately 5 to 8 years. However, the average life cycle of their chargers is between 1 and 3 years, depending on the intensity of operation. Among the most frequent reasons for charger replacement are cable loss and disruption.

This HP 613764-001 adapter Replaces:

511483-001 / 613764-001,611483-001 611484-001 613765-001,503377 503377-001 / 508153-001,503378-001 / 508154-001,707818-002 / 707906-001, there are many spare parts and models.

This 613764-001 adapter Fits The Following HP Models:

Power supply with interface: 4P * 1,6P * 1, P2 * 1
Applicable HP desktop and workstation power supply: PS-4321-9HA HP-D3201EO HP-D3201E0 D10-320P2A D12-320P1B DPS-320MB A CFH0320AWWA PS-4321-9HP DPS-320NB A DPS-320NB-1 A D12-320P1B and other models
Applicable models: For HP MT series (4000 4300 6000 6005 6080 6200 6280 6300 6380 8000 PC8022 8080 8100 8180 8200 8280 8300 8380 6380) and other models
HP Compaq 8200 DPS-320NB-1
HP 6200 Pro 8200 Elite MT Microtower
HP Elite 6200 8200 CMT
HP Compaq 6000
Note :Cable pin three interfaces, only applies to the original HP chassis motherboard, not compatible with ordinary motherboard

Maintenance and instructions for the HP 613764-001 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

Tags:HP 613764-001 Adapter,HP 613764-001 Charger,HP 613764-001 Power Supply,replacement adapter for HP 613764-001,HP 8200 6200 6000 8000 8080.