FSP Mini ITX/Flex ATX 270W 80 Plus Certified Active PFC Replacement AC Adapter - 270W Adapter

FSP270-60LE Charger,Compatible with FSP Mini ITX/Flex ATX 270W 80 Plus Certified Active PFC

With latest technology, this adapter is specially designed with built-in protection to protect your computer against unexpected power surge damages. Besides, it also features stable voltage and noise reduction.Overall, this power adapter is of high efficiency and reliability
⚡️ New laptop charger
Most laptops can be used without any issues for approximately 5 to 8 years. However, the average life cycle of their chargers is between 1 and 3 years, depending on the intensity of operation. Among the most frequent reasons for charger replacement are cable loss and disruption.

This FSP FSP270-60LE adapter Replaces:

FSP270-60LE
80PLUS CERTIFIED
270-WATT CONTINUOUS OUTPUT
40mm COOLING FAN SYSTEM
THERMAL CONTROL SYSTEM LINKED TO FAN
ENERGY SAVER | 1-WATT STANDBY MODE
HIGH POWER CONVERSION EFFICIENCY
ACTIVE PFC | FULL RANGE INPUT

This FSP270-60LE adapter Fits The Following FSP Models:

GENERAL SPECIFICATIONS:
COOLING Fan(s): Single, 40mm ball-bearing fan linked with Thermal Sensorn
TOTAL POWER OUTPUT: 270-WATT TOTAL CONTINUOUS OUTPUT @ 30鎺矯
OUTPUT CONNECTORS:
Motherboard: 20 + 4P
CPU: 4P
IDE: 4P * 2
SATA: 4P * 2
Floppy: Small 4P * 1

NVIDIA SLI SUPPORT: N/A
AMD/ATI CROSSFIRE SUPPORT: N/A
80PLUS CERTIFIED: YES, 80PLUS CERTIFIED
MODULAR CABLE: N/A
SAFETY APPROVAL: UL, NEMKO, TUV, CSA, IEC, CE
MTBF: 100,000 HOURS @ TYPICAL
Unit Dimensions: 80.0mm (W) X 150.0mm (D) X 40.0mm (H)
Unit Weight: 3.0 LB (S)
Retail Package: 8" (W) x 6" (D) x 4.25" (H) @3 lbs

INPUT SPECIFICATIONS:
Input Voltage: 115V AC to 230V AC, 47 ~ 63Hz
Power Factor Correction (PFC): ACTIVE PFC | FULL RANGE
Input Current: 5.0A @ 115 Vrms, 60 Hz. 3.0A @ 230 Vrms, 50 Hz.
Input Protection: Patented Input Fuse Protection
OUTPUT SPECIFICATIONS: +12V RAILS: 2
Output Voltage: +3.3V DC +5V DC
+12V1 DC
+12V2 DC
-12V DC
+5Vsb DC (Standby)

Output Current: 16.0A @ +3.3V DC
18.0A @ +5V DC
16.0A @ +12V1 DC
10.0A @ +12V2 DC
0.8A @ -12V DC
2.5A @ +5Vsb DC Standby

Output Protection: Complete OVP, OCP, SCP Protection

Complete OVP, OCP, SCP Protection

Maintenance and instructions for the FSP FSP270-60LE adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

Tags:FSP FSP270-60LE Adapter,FSP FSP270-60LE Charger,FSP FSP270-60LE Power Supply,replacement adapter for FSP FSP270-60LE,FSP Mini ITX/Flex ATX 270W 80 Plus Certified Active PFC.